First, the splicing method If the branches of the roots are sturdy, they can be connected by niches. The two sides of the shoots were cut to a 3.3-cm bevel, and they should be captured thinly and cut into the incisions of the roots. Second, the reverse oblique connection If the shoot is finer than the root, use the oblique cut method. First cut the branch from the center to a vertical incision 3.3 centimeters deep, then cut the root into two 3.3 centimeter bevels and insert the root into the incision of the shoot. Regardless of the type of connection, align the layers of the root system and then seal the wound with yellow mud or wax. When there is a large number of grafts, the seedlings will be planted in the trenches. The depth of the trench is about 1 meter, and the width is about 0.5 meters. The length of the valve can be determined according to the number of seedlings. The bottom of the ditch was covered with a layer of wet sand and covered with 3.3 cm of fine sand. If there is a large number of grafts, they can be buried in wet sand in the vegetable cellar. In the spring of the year following the “grain rain†festival, the semi-seedlings will be planted in the nursery. This method is very suitable for grafting mulberry, apple, pear trees, and its survival rate is about 85%. Adult diapers are disposable urinary incontinence products, one of the adult care products, and a disposable diaper mainly suitable for incontinent adults. Adult Pampers,Adult Diaper Liners,Adult Diaper Pants,Adult Diaper Price Shandong Kangshun Daily Products Co., Ltd , https://www.centurybenifit.com
Most products are flaky and shorts type. Use adhesive sheets to connect into a pair of shorts. The adhesive sheet also has the function of adjusting the waist size so as to fit different fat and thin body shapes.
Generally, the structure of diapers is divided into three layers from the inside to the outside. The inner layer is close to the skin and made of non-woven fabric; the middle layer is water-absorbent fluff pulp, added with polymer water-absorbing agent; the outer layer is an impermeable breathable film.