Superfine pulverizer safe use method

Ultra-fine pulverizer is suitable for a variety of materials, a variety of working conditions of the pulverization process, its pulverizing capacity is 0.5-5kg / h (experimental); pulverization temperature is room temperature ~ 196 ° C. For any fiber, high toughness, high hardness Or a material with a certain moisture content can be applied. It can crush high-fiber and other materials that cannot be crushed by a pulverizer; obtain a finer powder to improve the utilization rate of the material and obtain a powder with good fluidity, which can prevent the substance from deteriorating due to smashing heat. Keep the color, aroma, taste and nutrients of the crushed material unchanged; it can prevent dust explosion during the crushing process and reduce noise; the crushing capacity of the crusher is high.

During the production process of the ultrafine pulverizer, the temperature of the bearing must be checked frequently. When the temperature rises above 50 °C, the water-cooled tube should be connected to cool the bearing. When the temperature rises to 90 °C, stop the inspection, find out the cause and eliminate the fault. When the new machine is running, the transmission belt is easy to stretch, should pay attention to adjust the proper tightness of the belt to ensure the working life of the belt. Inspection, timely replacement to ensure production quality and production volume. Blades, always check the wear and tear, if worn, the productivity will decrease, the particle size will become thicker and will be replaced after wear.

The ultrafine pulverizer method improves the ultrafine pulverization ultrafine pulverization intensity and particle size distribution adjustment control technology on the basis of the process. Currently used for the preparation of ultrafine powder equipment, Raymond mill, vertical mill, ball mill, transfer Cartridge ball mill, vibration mill, grinding powder machine. Use the above pulverizing equipment to achieve uniform D98 particle size control, and have good grading equipment, which must be finely graded. The ultrafine pulverizer is suitable for dry superfine pulverization process. Due to high airflow speed, large impact force, powder in the case of airflow expansion It is pulverized and does not heat up. It is suitable for superfine pulverization of heat sensitive, low melting point and volatile materials. Adopt automatic and intelligent control system to achieve precise control of the crushing process and ensure uniform particle size distribution.