First, the safe use instructions:

1. The machine must be installed on a flat and hardened ground, and the grounding wire should be marked by the ground wire.

2. Check if the fasteners in each part are loose during transportation.

3. Check whether the oil holes in each part are unblocked and fill with a suitable lubricant.

4. Carefully remove debris from the fabric.

Noodles: The ratio of flour to water is about 10:2.5. According to the moisture content of the flour, increase or decrease according to the moisture content of the flour. After adding the raw materials, start the noodle switch until the fabric is evenly granulated. (Note: the fabric is matured for 5-8 minutes.) ).

Adjustment: Adjust the roll gap with the hand wheel. The adjustment principle is shown in the following table. During the adjustment process, adjust or loosen the amount of the hand wheel. Sometimes it is not easy to adjust the time. The key is to make clear the reason, to be patient and to adjust when not skilled. .

Operation: Put the mixed fabric into the dough bucket, press the knife and fix the blade (or hook) to start the operation. The third group of the face is led to the next group by hand, and so on.

Second, maintenance and maintenance instructions:

1. Carefully refer to the instructions for use. It is forbidden to operate illegally. The operator must wear a corset and keep the long-haired head and wear a work cap.

2. The professional electrician should be grounded. When the machine cover is removed, it must not be turned on.

3. It is forbidden to reverse. Before starting the machine, you should thoroughly check whether there are any abnormalities in each part, and find out the problem in time.

4. It is strictly forbidden to extend your hand within 10cm of the rotating part during work.

5. Ensure the lubrication of each rotating part.

6. The clutch of the single-group noodle rolling machine should be moved during the shutdown.

7, 3-5 minutes in front of the rolling, the temperature of the winter studio should be maintained above 15 degrees.

8, broken face can not be directly into the dough, use the noodle machine to break.

9. Replace the bearing lubricant (lithium grease) once a year.

10. Do not drop hard objects into the rolls and gears.