In order to meet the habits of the scorpion, and to obtain better conditions for the growth, development and reproduction of the scorpion, the scorpion can be cultured by simulating the natural environment. The points for simulating the natural environment are listed as follows: 1. The principle of site selection The new breeding farm must first choose a suitable site. In the plain area, the terrain should be high-dry, sandy, well-drained, and the terrain should be slightly southward; in the hilly areas of the mountainous area, the leeward sun should be selected, the area is relatively large, the groundwater level is low, and the ground is slightly sloped (but not too large). Choose from north to south, north to south and low, ventilation, sunshine and drainage are good places, on the one hand to create conditions for the insulation of the shed (shed), on the other hand, when the storm is not easy to be flooded. The site requirements are shown to be contaminated with harmful substances such as pesticides and fertilizers. There are no chicken farms, pig farms, slaughterhouses, or lime plants nearby. The water source should be clean. Normal tap water or deep well water can be used. In addition, for ease of management, there should be a reliable power supply and no noise around. Due to the long-term nature of the breeding business, the site conditions chosen should be stable. 2. Market layout After the site is determined, it must be planned comprehensively. When the scale is larger, it can be generally divided into breeding room, breeding room, bait room, and the living facilities of managers. When the scale is small, the dike pools of different sizes can be built on both sides or around the house (to leave a certain width of the pedestrian passage). The male cubs, female cubs, and young cubs are housed in the shed. Breeding larvae and leaving space for flowers and plants to allow scientific and rational distribution of plants and animals in the same space. Winter heating methods for alfalfa breeding: The bran is a cold-blooded animal, and the body temperature will change with changes in the temperature environment. In the tropics, there is no hibernation. Under the conditions of artificial rearing in the north, the temperature of the rearing room is maintained at 15°C or more, and with sufficient feed supply, the cockroach will not enter hibernation. Therefore, cockroaches can also be kept warm by feeding in winter to avoid hibernation. Warming houses must have good insulation properties so that fuel can be saved and ventilation and ventilation conditions must be provided. When the indoor air is not fresh, ventilation can be performed without drastically reducing the room temperature, and insulation must be taken care of during ventilation. Feeding methods can be varied. Indoor heating and raising can be carried out in various forms such as aquarium raising, pond raising, and raising and raising. The rearing density is calculated based on the container area, which is generally 600 to 1,000 square meters. According to this density planning scale. Warming room temperature is often maintained at 15 ~ 25 °C, the best temperature for growth and development is 20 ~ 25 °C. The air humidity is maintained at 15% to 20%, and the humidity of the cultivating soil should be maintained at 10% to 15%. At the same time prepare feed, especially animal feed. The breeding technology for indoor warming has now been widely used. Breeders can carry out warming culture work according to their specific breeding conditions, continuously sum up experience, have some inventions, discoveries, and advances in order to sum up techniques for efficient rearing. . Hose Reel Cart,Portable Hose Reel Cart,Commercial Hose Reel Cart,Industrial Hose Reel Cart NINGBO QIKAI ENVIRONMENTAL TECHNOLOGY CO.,LTD , https://www.water-hose-reel.com