Digital Temperature tester Non Contact Digital Laser Infrared Thermometer
1, This non contact infrared thermometer is certificated by CE, FDA, ROHS.
2, This clinic thermometer adopts advanced infrared technology, ultra-sensitive sensors and optimized algorithm, makes the infrared thermometer get temperature readings in a distance of 15cm.
3, High accuracy: built-in infrared sensor collects accurate temperature readings in 1S, accuracy is 0.1°C/0.2°F for body mode. It is more accurate than standard mercury thermometers.
4, Fever alarm - 3 Color backlight indicate different temperature results, red backlight means high fever(default range is 38°C-43°C), orange backlight means light fever(37.5℃-37.9℃), green backlight means normal temperature(32.0℃-37.4℃).
5, This medical infrared thermometer built-in sound and visual fever alarms, and it will inform you when temperatures reach a feverish level.
Infrared thermometer parameters:
* Temperature range: Body temperature 34.0°C~42.9°C (93.2°F-109.22°F), Object temperature 0°C~100°C(32°F-212°F) Infrared Non Contact Thermometers PC868 infrared thermometer,infrared forehead thermometer,Clinical Infrared Thermometer,digital thermometer,medical infrared thermometer, non contact thermometer Axiswell Technology Co., Ltd , https://www.medhealthycare.com
Yan Zhihong Shanghai Light Industry Machinery Co., Ltd. The total jump far <br> <br> for the design and selection of traditional Chinese medicine equipment, first of all to emphasize or process, can be used to see whether the new extraction technology and other ways to strengthen the process of extraction and concentration, research new technology to drugs And the effects of different component extractions, on the basis of in-depth pharmacological research, looking for good operating conditions and possible mechanism of action, and then design small industrial equipment. In terms of details, because it is a complete set of equipment, it is necessary to consider the working time and cycle of each equipment, and reasonably select the size of the equipment. During the same period, there may be no work interruption due to the size of the equipment. In addition, it is also necessary to pay attention to the problem of energy conservation. For complete sets of equipment, it is necessary to optimize the process as much as possible, shorten the corresponding pipelines, and reduce the energy consumption loss during the material transportation process. Reasonably arrange the installation location of the equipment to save space and save equipment costs. At the same time, it is also necessary to pay attention to its operability and the operator's operation is convenient, time-saving and labor-saving, making it more human. In other words, it is necessary to pay attention to the cost performance of the equipment in the early stage and the operation cost in the later stage, as well as the versatility and practicality of the equipment.
The choice of equipment is also related to the location of the enterprise. Just like the construction of a large city in a large city, the general level of a single floor is similar to the price/performance ratio. For example, the problem of condensed water commonly found in extraction and concentration, if it is not in a water-deficient area, to do cooling towers, cold water, pipelines, etc., but also pumping, the economic benefits may not be so obvious, many companies are not willing to do. So choose the right one, it is zui reasonable, zui economy.
Solemn Zhengzhou Tongsheng Pharmaceutical Co., Ltd. (1) select the main varieties of production; (2) similar or similar processes; (3) have a certain forward-looking production forecast; (4) rationally balance the material balance of each production unit to avoid There is a “card neck†unit; (5) the equipment layout minimizes the material transfer distance of the intermediate link; (6) when the main output variety changes, the replacement of the equipment, the reserved position; (7) the convenience and safety of operation.
Xiao Jieming, Director of Hangzhou Chunjiang Automation Research Institute
(1) Design and selection of Chinese medicine complete sets of equipment should first comply with the provisions of GMP and its appendices. The process layout should follow the principle of coarse and fine first, and the production capacity of each unit equipment should be basically the same; (2) The purchase of traditional Chinese medicine complete sets of equipment should give priority to enterprises and products that implement and meet the national standards of pharmaceutical equipment to ensure purchase. The product quality of the equipment; (3) The relationship between function and output should be considered. When the output is small, multi-function net equipment should be selected to process various medicinal materials in a multi-purpose manner and reduce equipment investment. When the output is large, the equipment should be selected according to the shape and texture of the medicinal materials, and the process requirements should be met. (4) When searching for relevant materials, it is necessary to conduct on-the-spot investigations to understand the production scale, production capacity, processing equipment capacity, and technology development of equipment manufacturing enterprises. Capabilities and service capabilities, etc., for pressure vessels and other products, should also check the corresponding qualification certificate; (5) select the equipment produced by the same manufacturer as much as possible.
Zhaokai Jun Nanjing Zhongshan Pharmaceutical Co. engineer <br> <br> medicine equipment selection to consider supporting the main section of each case. Taking the extraction and concentration equipment as an example, the extraction capacity should be compatible with the concentration ability, because the extracted liquid should enter the concentration process, and if the concentration efficiency cannot keep up, the next production will be affected. If the concentration ability is large and the extraction ability is small, the equipment is wasted. The equipment should be selected according to the actual situation of each pharmaceutical factory, because the various parameters of the equipment and the theoretical production efficiency vary according to the variety. Do not design the complete set of Chinese medicine equipment according to the theoretical production efficiency, must be based on its own variety. The actual choice is made.
Lin Yanhai Yunnan Pharmaceutical Co., Ltd. Bio Valley Dengzhanhua <br> <br> preparation process is an important part of preparation of the study, research preparation process should be guided by the theory of Chinese medicine, prescription drugs analyze other agents, the application of modern science and technology Methods The research of process route design, process technology condition screening and pilot test series was carried out, and the research materials were sorted and summarized to make the preparation process scientific, reasonable, advanced and feasible, so that the developed preparations can be safe, effective and can be Control and stability.
Design and selection of Chinese medicine complete sets of equipment should pay attention to: (1) equipment capacity. Whether the production capacity of the equipment is consistent with the design capacity of the enterprise, whether the production capacity of each equipment of the entire extraction line is coordinated; (2) Material. Contact with any substance, whether the contact will react or corrode, whether there is any quality hazard in long-term use; (3) The process requires the detection means in production, whether the production equipment can do it. (4) Cleaning of equipment. Whether the equipment is clean, those places are dead corners when cleaning; (5) Whether the equipment is well maintained, when the fault occurs, whether the repair of the manufacturer is convenient and timely; (6) The safety of the equipment design. Whether the production process, maintenance process is designed with safety switch, whether the existing equipment has unsafe factors; (7) the energy used by the equipment; (8) whether the appearance (height, volume) of the equipment is suitable for the existing plant.
Wei Zengyu Lianyungang Chinese Medicine Higher Vocational and Technical School Pharmaceutical Preparation Training Center Engineer (1) The material of the equipment must meet the requirements of the new GMP clause of zui; (2) The selection of complete sets of equipment should be based on the production process with pilot scale amplification. Otherwise, according to the equipment modification process, it will bring potential risks to the production of drugs; (3) The design and selection of equipment should consider the requirements of sanitation and cleaning. The pretreatment equipment of traditional Chinese medicine has higher requirements on the environment, because the traditional Chinese medicine pretreatment process is rich in variety. The workload is large, the dust is much, the water is used, the air is humid, and it is easy to cause quality accidents such as confusion and pollution. For how to quickly clean the equipment and reduce the workload of the personnel, it is necessary to consider in the selection stage; (4) Refinement of traditional Chinese medicine The process is constantly improving, so some interfaces should be reserved during the design and selection of the equipment to facilitate the process improvement.
* Precision: 0.1°C
* Error in measurement: ±0.2°C
* Method: Non-contact mid forehead detection
* Detection distance: 1cm-3cm
* Response time: ≤2 sec
* Auto power off: 12 sec
* Data Storage: 32 sets
* LED Indicators with sound alarm for different status: Green,yellow,red represents normal,low fever and high fever
* Power: AAA battery*2
* Storage: Temperature - 20°C~50°C (-4°F-122°F); relative humidity ≤90%
* Operation: Temperature 16°C~35°C (60.8°F-95°F); relative humidity≤85%
How to choose the right extraction and concentration equipment to improve the yield?