The paste filling machine uses compressed air as the power, and the automatic filling system is composed of precision pneumatic components. The structure is simple, the action is sensitive and reliable, the adjustment is convenient, and it is suitable for various liquids and viscous fluids. Quickly mix and quantitatively fill the automation equipment. The utility model adopts a horizontal spiral structure, so that the material can be tumbling up and down, and the left and right staggered fast movements, thereby achieving the purpose of quickly and uniformly mixing the materials. The device has the characteristics of simple structure, convenient use, small occupied area, light weight, low noise, energy saving, convenient loading and unloading, durability, and easy maintenance. First, the application of paste filling machine Paste filling is also suitable for working in flammable and explosive environments. It is suitable for pharmaceutical, daily chemical, food, pesticide and special industries. It is an ideal viscosity fluid filling equipment. Automatic error detection and correction system ensures accurate and rapid quantitative calculation; weighing value can be set arbitrarily, automatic weighing, automatic filling; stable and reliable performance; pocket bag system can clamp soft packaging bag for easy filling Installed. The operation is simple, convenient, fast and efficient. The shaft and the feeding pipe are all made of seamless steel pipe, which has higher strength and better stability. For extremely light, fibrous materials, it can be stirred evenly. Second, the working principle of the paste filling machine And the compressed air source is turned on, and the air source pressure is 0.6 MPa, for example, the first valve is installed in the main pipeline of the compressed air. Firstly rotate the filling volume to adjust the handwheel, observe the indicator window scale to achieve the required loading, adjust the suction and discharge speeds to achieve a satisfactory filling effect, measure the filling amount, and finally correct the filling volume. . Check the sealing surface with the air source, adjust the air pressure to 0.3~0.4MPa to adjust the oil intake. After a general operation, spray a drop of oil several times, and check the fuel injection regularly. Anti-drip filling system: When the filling is done, the cylinder moves up and down to drive the bulkhead. When the cylinder moves upwards, the bulkhead is upward, that is, the valve is opened, and the material is started to be filled; otherwise, the filling is stopped. Third, the characteristics of the paste filling machine The mixing system stirs the materials to achieve uniform mixing. Forced fast independent loading system. Specially responsible for forcing the material to be quickly lifted and pushed into the mixing chamber for mixing and mixing. It mainly includes a flat push mechanism and a vertical lift mechanism. It adopts the method of horizontal push and vertical forced lifting, and those materials that are extremely light, extra-fine and difficult to lift are forcibly pushed into the mixing bin to achieve the purpose of continuous and rapid feeding. The mechanism can fundamentally solve the backflow overflow of the material in the mixing chamber due to shutdown or power failure. The dosing system is specifically responsible for filling the material to the customer's required weight value. It mainly includes: quantitative filling control system, entrainment system, weighing induction system. The electronic control box is specifically responsible for controlling the operation of the entire device and providing the necessary protection for the device.