Here are some tips for your reference:
　　 1. First place the prepared ice cream slurry in a freezer to cool it to about 5 degrees. Try to avoid too low temperature to prevent the slurry from being thick and unable to flow into the freezing cylinder.
　　 2. Due to the high outdoor temperature, the temperature of the ice cream slurry in the storage tank will gradually increase with the ambient temperature. Please adjust the fixed rest time of the compressor to reduce the temperature of the ice cream machine in the tank. Don't wait too long;
　　 3. When selling ice cream cones, try to avoid the same taste all the time, to make the wrong taste, take turns to use three flavors to play the cone, which can increase the yield and the relative hardness of the ice cream, to a certain extent, also to the compressor A protection that extends the life of the compressor;
　　 4. If the ice cream powder used can be stirred with cold water, use a portion of edible ice cubes instead of drinking water while stirring, so as to achieve rapid cooling.
I hope that I can help you understand and choose the right soft ice cream machine, and at the same time, it can better and more effectively provide the output of ice cream machine.
Guide: On a hot summer day, ice cream cones will be your favorite. As an ice cream machine for making ice cream cones, how can we better and more effectively increase the output of ice cream machines? In addition to our selection of high-efficiency compressors and large-capacity tanks, how do we provide efficiency and output when operating the machine and when making ice cream?
On a hot summer day, I often see a lot of people waiting in front of the ice cream machine in the cold drink shop waiting for the cone; first, choose the right amount of ice cream machine according to the daily traffic and the number of cones played. Again, you can choose the ice cream machine with high cooling efficiency and good power performance , and the user should pay attention to some operation skills when using the ice cream machine, so as to minimize the waiting time and maintenance of the machine.
Â