Model NO.: Apollo 820
Trademark: RENDER
Origin: Tianjin
HS Code: 9018199000
Apollo 820 Infusion Pump:
1.Bubble detector and pressure sensor can precisely detect tube air bubbles
2.Unique Voice Alarm system and accurate injection rate make the injection process safer and more reliable.
3.HD LCD display working status.
4.Have store many brands IV sets,Automatically calibration and compatible with any brand infusion sets.
5.Work mode: ml/h and drop/min, and these two modes can switch freely.
6.KVO and Bolus functions.
 
Technical parameters of Apollo 820 infusion pump: 
Unique  Human Voice
Alarm system
The  device  triggered  the  human  voice  prompt  and  stop  injection
automatically when there is any malfunction, making the infusion process
safer and more reliable.
Rate:  1ml/h~1,200ml/h
Flow Rate Accuracy:  Within ±5% (after correct calibration)
Mechanical precision:  Within ±2%
Purge Rate:  100ml/h~1,000ml/h (100 ml/h step)
Infusion Volume:  1ml~9999ml
Total Infusion Volume:  0.1ml~9999.9ml
KVO rate:  1ml/h~5 ml/h (1ml/h step)
Occlusion:
High: 800mmHg ±200mmHg (106.7kPa±26.7kPa
Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa
Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa )
Alarms:
End of injection, occlusion, door open, bubbles in the tube, wrong setting,
low battery, AC power pulled out etc.
Power Source:
AC  100V ~240V,  50/60Hz;  Internal  rechargeable  Li  battery,
capacity≥1,600mAh, 4 hours internal battery backup
Bubble detector:  Ultrasonic wave detector; detection sensitivity ≥25μL
Fuse:  F1AL/250V, 2 pc inside
Power Consumption:  30VA
Operating Condition:
Ambient temperature: +5ºC~+40ºC;
Relative humidity: 20~90%
Atmospheric pressure: 86.0kpa~106.0kpa
Transport  &  Storage
Condition:
Ambient temperature: -30ºC~+55ºC
Relative humidity: ≤95%
Equipment
Classification:
Class I, internal power supply, Type CF