Square Wire Mesh,Fresh Goji Berries,Chain Link Fence Triangle Bending Fence ,Related Products Co., Ltd. , http://www.chsteelmesh.com
Code No.: IV-1, IV-2, IV-3
Consist of:
1. Piercing device--Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4
Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned
Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site-
Made of hard transparent PVC+injection site made of natural or synthetic
Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm,
150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1pc/blister package 20pcs/mid. PE bag, 20 bags/ctn carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components)
1pc/polybag (HDPE, LDPE, compound film), 20pcs/mid. PE bag, 20bags/ctn, carton size changes according to the specific volume of Products.
Remark: You can also give us your specific requirements to confirm the products you need finally.
Products: I. V. Solution Administration Sets.
Code No.: IV-1, IV-2, IV-3
Consist of:
1. Piercing device--Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4
Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned
Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site-
Made of hard transparent PVC+injection site made of natural or synthetic
Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm,
150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1pc/blister package 20pcs/mid. PE bag, 20 bags/ctn carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components)
1pc/polybag (HDPE, LDPE, compound film), 20pcs/mid. PE bag, 20bags/ctn, carton size changes according to the specific volume of Products.
Remark: You can also give us your specific requirements to confirm the products you need finally.
Model NO.: normal
Needle: With Needle
Syringe Use: Intramuscular Injection
Disinfection: Without Disinfection
Medical Device Regulatory Type: Type 3
Medical Devices Reg./Record No.: Gsyjxz20143661141
Trademark: NJM
Transport Package: PE bag or blister packing
Specification: CE; ISO9002; EN46002
Origin: China
HS Code: 90183900
Model NO.: normal
Needle: With Needle
Syringe Use: Intramuscular Injection
Disinfection: Without Disinfection
Medical Device Regulatory Type: Type 3
Medical Devices Reg./Record No.: Gsyjxz20143661141
Trademark: NJM
Transport Package: PE bag or blister packing
Specification: CE; ISO9002; EN46002
Origin: China
HS Code: 90183900
Products: I. V. Solution Administration Sets.