The Water Meters are the
most popular used meters and have very long history of development. Water
meters are mainly measuring the total flow for the water consumption. From many
years of growing and development, from the very simple water meters,residential water meter,cold water meter, electronic
water meters, Mechanical Water Meters, Ultrasonic Water Meters, smart water
meters to the wireless water meters, people cares much more about the water
meters accuracy and energy saving. Our company concentrates on the development
of the mechanical water meters and ultrasonic water meters for many years.
Our mechanical water
meters are mainly with the accuracy class 3 and our ultrasonic water meters are
with the accuracy class 2. Now our company is still developing the water meters
with higher level accuracy. Comparing with the traditional simple water meters,
our water meters strengthen the advantages of water saving, higher accuracy,
easy installation and long lifetime use. Usually speaking, our water meters
have more than 5 years quality guarantee. Meanwhile, low cost maintenance is
also very good advantages of our water meters.
Water Meters Water Meters,Ultrasonic Water Meters,Mechanical Water Meters,Smart Water Meters,Residential Water Meter,Cold Water Meter Berggruen Technology Co.,Ltd , https://www.meter-technology.com
Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
Rat basic fibroblast growth factor (FGF-2) ELISA kit
 ( used in serum, plasma, cell culture supernatants and other biological fluids )
principle
This experiment used double antibody sandwich ABC-ELISA. The anti-rat FGF-basic monoclonal antibody was coated on the plate, the FGF-basic in the standard and the sample was combined with the monoclonal antibody, and biotinylated anti-rat FGF-basic was added to form an immune complex. On the horseradish peroxidase-labeled Streptavidin combined with biotin, the substrate working solution is blue, and finally the stop solution sulfuric acid is added, and the OD value is measured at 450 nm. The FGF-basic concentration is proportional to the OD value, and can be passed. A standard curve was drawn to determine the concentration of FGF-basic in the specimen.
Kit composition ( 2-8 ° C preservation)
Coated Wells
96 holes
Enzyme Conjugate
12ml
10× specimen dilution (Sample Buffer)
12ml
20×Wash Buffer
50ml
Standards: 40ng / bottle
2 bottles
Substrate working fluid (TMB Solution)
12ml
Primary antibody working solution (Biotinylated Antibody)
12ml
Stop Solution
12ml
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (EDTA, citrate, heparin anticoagulation), cell culture supernatant, tissue homogenate, etc., as early as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen (-20 °C or -70 °C) Save to avoid repeated freezing and thawing.
2. Standard solution preparation: Add 1 ml of distilled water before use and mix well to prepare a 40 ng/ml solution. Set the standard tube 8 tube, the first tube plus the standard dilution 900ul, the second to the eighth tube to add the sample dilution 500ul. Add 100 ul of the standard solution of 40 ng/ml to the first tube, mix and aspirate 500 ul with the sampler, and transfer to the second tube. Repeat the dilution as described above, and remove 500 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution per well, set 37 The reaction was carried out in the dark at °C for 15 minutes.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Take the standard products 4000, 2000, 1000, 500, 250, 125, 62.5, 0 pg/ml as the abscissa and OD as the ordinate. Draw on the coordinate paper and draw the standard curve.
3. Find the corresponding FGF-basic content on the graph based on the OD value of the sample.
Kit performance
1. Sensitivity: The minimum FGF-basic detection concentration is less than 30pg/ml.
2. Specificity: Recombinant or natural rat FGF-basic can be detected simultaneously. Does not cross-react with other cytokines in rats.
3. Repeatability: The coefficient of variation in both the plate and the plate is less than 10%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4 o C refrigerator.
5. This kit is for scientific research only and cannot be used for clinical diagnosis!
Shanghai Xitang Biotechnology Co., Ltd. 021-55229872, 65333639
,