Choose the water source that meets the standard. The selection of water sources should be far away from sources of pollution, such as waste water discharge lines in factories and living areas. It is best to choose tap water or deep well water, which requires colorless, odorless, microbiological and mineral content to meet the national drinking water standards. For non-tap water supplies, install filters on the pipes that enter the house. In particular, water towers and drinking water pipelines, which are used for a long time, should be subject to filtration of water quality. Suspicious water sources or mildly polluted water can be used to disinfect the water, and the disinfected water can be used after being qualified for monitoring. The disinfectant is usually based on bleaching powder. Method of use: Calculate the amount of bleaching powder required for each pumping amount to calculate the amount of water pumped. The usual amount of drinking water disinfection is 4 grams to 8 grams of bleaching powder per cubic meter of water. Note that sterilized drinking water can not be used to immunize live vaccines to avoid immunization. Drinking water system cleaning and disinfection (for water lines, for example, sink cleaning similar). According to the hygienic condition of the chicken house, clean the outer wall of the drinking water pipeline or the clean ball on the water tank by hand (wiping brush can be installed on the hopper, and the water line is cleaned every time the vehicle moves), keeping the pipeline bright As new, there is no place for microorganisms to breed. It is recommended to clean every 5 days - 7 days. The temperature of the chicken house is appropriate, and the pressure in the waterline is constant. The long-term drinking water and the like will form a layer of nutrient film on the inner wall of the waterline, and bacteria, algae and other microorganisms can easily grow and multiply, thereby causing pollution of drinking water quality. The commonly used treatment methods are: 1 For empty barn houses: empty the drinking water pipeline, rinse with high pressure water gun to remove the dirt inside and outside the drinking water pipe. Then in the drinking water pipe, some drugs can be removed to remove biofilm, such as 0.1% hydrogen peroxide or 0.2% of Saikoxin, etc. After 4 hours of detention, they are washed out with high-pressure water, and the water is used for emptying. . 2 For the shed: After cleaning the outer wall of the drinking water pipe, every 14 days to 30 days, use a pressure pump to put some chlorine agent and other disinfectants into the drinking water pipeline. Concentration is according to the instruction manual of various products, and it should be stirred evenly when used. After 15 minutes, open the water to wash away the potion to prevent poisoning. The disinfectant with descaling function can be used for serious pollution. After extinguishing the lights at night, it can be soaked in the water pipe with the concentration of drinking water and rinsed in the morning to achieve better disinfection effect. Monensin Granular,Monensin Growth Promoter,Monensin Antibiotics,Monensin Feed Additives Shandong Shengli Bioengineering Co., Ltd , https://www.shenglipharm.com